Telemecanique Photoelectric Sensors XU, XU5, Diffuse, Analog, Sn 0.4 M, 12...24VDCM12
Telemecanique Photoelectric Sensors XU, XU5, Diffuse, Analog, Sn 0.4 M, 12...24VDCM12 is available to buy in increments of 1
Quick Overview
Range: Telemecanique Photoelectric Sensors XU
Sensor Type: Photo-electric sensor
Type of Output Signal: Analogue
Material: Metal
Specifications:
| Range of product | Telemecanique Photoelectric Sensors XU |
| Series name | Application: Material Handling |
| Electronic sensor type | Photo-electric sensor |
| Sensor name | XU5 |
| Sensor design | Cylindrical M18 |
| Detection system | Diffuse |
| Material | Metal |
| Type of output signal | Analog |
| Supply circuit type | DC (Direct Current) |
| Wiring technique | 3-wire |
| Nominal sensing distance [Sn] | 0.05 to 0.4 meters (diffuse) |
| Discrete output type | PNP |
| Analog output range | 4...20 mA |
| Electrical connection | 1 male M12 connector, 4 pins |
| Product-specific application | Not applicable |
| Emission | Infrared (diffuse) |
| Complementary | |
| Enclosure material | Nickel-plated brass |
| Lens material | PMMA (acrylic) |
| Add-on output | Analog output included |
| Status LED | 1 green LED for output state |
| Rated supply voltage [Us] | 12...24 V DC with reverse polarity protection |
| Switching capacity | 4...20 mA |
| Current consumption | ≤ 30 mA (no load) |
| Delay first up | 50 milliseconds |
| Setting-up | Sensitivity adjustment via potentiometer |
| Environment | |
| Vibration resistance | 25 gn, amplitude ±2 mm (10–55 Hz), per IEC 60068-2-6 |
| Shock resistance | 30 gn for 11 ms, per IEC 60068-2-27 |
| IP degree of protection | IP67 per IEC 60529 |
| Weight | 0.075000 |
|---|---|
| Brand | Telemecanique |
| Model | XU5M18AB20D |
| Range | OsiSense XU |
| Family | IDSEN |
| Type | Photoelectric Sensors |
Write Your Own Review
















The information below is required for social login
Sign In
Create New Account