Telemecanique Photo-electric Sensor, XUK, Polarised, Sn 5m - 12..24VDC, Cable 2m
Telemecanique Photo-electric Sensor, XUK, Polarised, Sn 5m - 12..24VDC, Cable 2m is available to buy in increments of 1
Quick Overview
Range: Telemecanique Photoelectric sensors XU
Sensor type: Photo-electric sensor
Wiring technique: 3-wire
Material: Plastic
Specifications:
Range of product | Telemecanique Photoelectric sensors XU |
| Series name | General purpose single mode |
| Electronic sensor type | Photo-electric sensor |
| Sensor name | XUK |
| Sensor design | Compact 50 × 50 |
| Detection system | Polarised reflex |
| Material | Plastic |
| Type of output signal | Discrete |
| Supply circuit type | DC |
| Wiring technique | 3-wire |
| Nominal sensing distance (Sn) | 6 m polarised reflex (requires reflector XUZC50) |
| Discrete output type | PNP |
| Discrete output function | 1 NO |
| Electrical connection | Cable |
| Product specific application | Not applicable |
| Emission | Red polarised reflex |
| Complementary | |
| Enclosure material | PBT |
| Lens material | PMMA |
| Output type | Solid state |
| Status LED | 1 yellow LED for output state |
| Rated supply voltage (Us) | 12…24 V DC (reverse polarity protection) |
| Switching capacity | ≤ 100 mA (with overload and short-circuit protection) |
| Switching frequency | 250 Hz |
| Maximum voltage drop | < 1.5 V (closed state) |
| Current consumption | ≤ 35 mA (no-load) |
| Delay first up | 15 ms |
| Delay response | 2 ms |
| Delay recovery | 2 ms |
| Setting-up | Without sensitivity adjustment |
| Vibration resistance | 7 gn, amplitude ±1.5 mm (10–55 Hz), IEC 60068-2-6 |
| Shock resistance | 30 gn for 11 ms, IEC 60068-2-27 |
| IP degree of protection | IP65, double insulation (IEC 60529) |
| Weight | 3.000000 |
|---|---|
| Brand | Telemecanique |
| Model | XUK9APANL2 |
| Family | IDSEN |
| Material | Plastic |
| IP Degree of Protection | IP65 |
Write Your Own Review






The information below is required for social login
Sign In
Create New Account