Schneider Electric Universal dimming actuator REG-K/230/500 W, light grey
Total number of 18 mm modules: 4
[Ue] rated operational voltage: 220...230 V AC 50...60 Hz
Number of outputs: 1
Universal dimming actuator has 1 channel 500W/VA with manual override. It has automatic load detection. the actuator can be installed for Installation on DIN rails TH35 according to EN 60715 Each output has Nominal voltage: AC 220 - 230 V, 50 - 60 Hz. Minimum load is 25 W ohmic & 50 VA ohmic/inductive/capacitive. It controls lamps such as incandescent, HV /LV halogen using dimmable wound or electronic transformers. It is able to control different dimming curves and dimming speeds, the same dimming tim. it has short-circuit, open-circuit and excess temperature protection with soft start functio. The device has 4 module width, approximately 72 mm.
Specifications:
Main | |
Range of product | KNX |
product or component type | Dimming actuator |
Operating mode | KNX bus system |
Manual | |
Bus type | KNX |
Complementary | |
total number of 18 mm modules | 4 |
mounting support | DIN rail |
[Ue] rated operational voltage | 220...230 V |
Network frequency | 50...60 Hz |
Input type | 1 x push-button: 230 V AC |
1 x electronic push-button: 230 V AC | |
number of outputs | 1 |
local signalling | LED |
Load type | Incandescent lamps: 30...500 W at 230 V AC |
Halogen lamps: 30...500 W at 230 V AC | |
LV halogen lamps: 50...500 VA (wound transformer) | |
LV halogen lamps: 50...500 W (electronic transformer) | |
Environment | |
IP degree of protection | IP20 |
Weight | 0.273000 |
---|---|
Brand | Schneider Electric |
Color | Light Gray |
Range | KNX |
IP Degree of Protection | IP20 |
Validate your login
Sign In
Create New Account