Universal dimming actuator has 1 channel 500W/VA with manual override. It has automatic load detection. the actuator can be installed for Installation on DIN rails TH35 according to EN 60715 Each output has Nominal voltage: AC 220 - 230 V, 50 - 60 Hz. Minimum load is 25 W ohmic & 50 VA ohmic/inductive/capacitive. It controls lamps such as incandescent, HV /LV halogen using dimmable wound or electronic transformers. It is able to control different dimming curves and dimming speeds, the same dimming tim. it has short-circuit, open-circuit and excess temperature protection with soft start functio. The device has 4 module width, approximately 72 mm.
Specifications:
Main |
|
Range of product |
KNX |
product or component type |
Dimming actuator |
Operating mode |
KNX bus system |
Manual |
|
Bus type |
KNX |
Complementary |
|
total number of 18 mm modules |
4 |
mounting support |
DIN rail |
[Ue] rated operational voltage |
220...230 V |
Network frequency |
50...60 Hz |
Input type |
1 x push-button: 230 V AC |
1 x electronic push-button: 230 V AC |
|
number of outputs |
1 |
local signalling |
LED |
Load type |
Incandescent lamps: 30...500 W at 230 V AC |
Halogen lamps: 30...500 W at 230 V AC |
|
LV halogen lamps: 50...500 VA (wound transformer) |
|
LV halogen lamps: 50...500 W (electronic transformer) |
|
Environment |
|
IP degree of protection |
IP20 |