The Schneider Electric RM35TM50MW relay is designed for motor voltage control and temperature monitoring in industrial and commercial applications.
This relay features 2NO (2 normally open) contacts, allowing independent control of two devices or motors.
Key Features:
Multi-Voltage Operation: The RM35TM50MW relay is compatible with a wide range of voltages from 24V to 240V AC/DC, making it suitable for various system requirements.
Independent Control: With 2NO (2 normally open) contacts, this relay enables independent control of two separate devices or motors, facilitating different operations within the same system.
Temperature Monitoring: The relay includes temperature monitoring capability, which helps prevent operation at undesirable temperature levels and ensures efficient motor performance.
High Reliability: Schneider Electric is a globally recognized leader in automation and electrical solutions, and the RM35TM50MW relay is known for its high quality and reliability.
This relay can be used in a wide range of applications, including motor control, industrial systems, heating, ventilation, air conditioning systems, and more. It offers a dependable solution for device and equipment control and monitoring.
Technical Specifications:
AC/DC Voltage: 24-240V
Contact Configuration: 2NO (2 normally open)
Specifications
| Main | |
| Range of product | Harmony Control Relays |
| Product or component type | 3-phase control relay |
| Relay type | Motor temperature control relay |
| Product specific application | For 3-phase supply |
| Relay name | RM35TM |
| Relay monitored parameters | Phase sequence |
| Motor temperature via PTC probe | |
| Phase failure detection | |
| time delay | Fixed 0.3 s |
| Switching capacity in VA | 1250 VA |
| Measurement range | 208...480 V voltage AC |
| 0...20 Ohm short-circuit detection | |
| Contacts type and composition | 2 NO |
| [Uc] control circuit voltage | 24...240 V |
| Complementary | |
| Reset time | 10000 ms output |
| Maximum switching voltage | 250 V AC |
| 250 V DC | |
| Minimum switching current | 10 mA at 5 V DC |
| Maximum switching current | 5 A AC |
| 5 A DC | |
| Supply voltage limits | 20.4…264 V AC |
| 20.4…264 V DC | |
| Power consumption in VA | 0…4 VA at 24...240 V AC |
| power consumption | 0.5 W DC |
| control circuit frequency | 50...60 Hz +/- 10 % |
| Resistance across terminals | 602 mOhm |
| Output contacts | 2 NO |
| Nominal output current | 05:00 ص |
| Measurement voltage limits | 176…528 V AC |
| delay at power up | 500 ms |
| Voltage range | 176...528 V |
| Response time | > 50 ms (input Y1 (contact Y1-T1) and push-button) |
| [Uc] control circuit voltage | <= 3.6 V of temperature control circuit (T1-T2 terminals open) |
| Short-circuit current | 0.007 A temperature sensing circuit (T1-T2 terminals short circuited) |
| Maximum resistance | 1500 Ohm for temperature sensor at 20 °C |
| Tripping threshold | 3100 Ohm +/- 10 % for temperature control circuit |
| Reset threshold | 1650 Ohm +/- 10 % for temperature control circuit |
| Marking | CE |
| Overvoltage category | III conforming to IEC 60664-1 |
| Insulation resistance | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5 |
| > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1 | |
| > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5 | |
| > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1 | |
| > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5 | |
| > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 | |
| [Ui] rated insulation voltage | 400 V conforming to IEC 60664-1 |
| Supply frequency | 50/60 Hz +/- 10 % |
| Operating position | Any position without derating |
| Connections - terminals | Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end |
| Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end | |
| Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end | |
| Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end | |
| Tightening torque | 0.6…1 N.m conforming to IEC 60947-1 |
| Housing material | Self-extinguishing plastic |
| Local signalling | LED (green) for power ON |
| LED (yellow) for phase of relay (R2) | |
| LED (yellow) for temperature of relay (R1) | |
| Mounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Electrical durability | 10000 cycles |
| Mechanical durability | 30000000 cycles |
| Operating rate | <= 360 operations/hour full load |
| Utilisation category | AC-12 conforming to IEC 60947-5-1 |
| AC-13 conforming to IEC 60947-5-1 | |
| AC-14 conforming to IEC 60947-5-1 | |
| AC-15 conforming to IEC 60947-5-1 | |
| DC-12 conforming to IEC 60947-5-1 | |
| DC-13 conforming to IEC 60947-5-1 | |
| Width | 35 mm |
| Net weight | 0.13 kg |
| Environment | |
| Immunity to microbreaks | 20 ms at 20.4 V |
| Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4 |
| Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 | |
| Immunity for industrial environments conforming to IEC 61000-6-2 | |
| standards | IEC 60255-6 |
| IEC 60034-11-2 | |
| product certifications | GL |
| UL | |
| GOST | |
| C-Tick | |
| CSA | |
| Directives | 73/23/EEC - low voltage directive |
| 89/336/EEC - electromagnetic compatibility | |
| Ambient air temperature for storage | -40…70 °C |
| Ambient air temperature for operation | -20…50 °C |
| Relative humidity | 95 % at 55 °C conforming to IEC 60068-2-30 |
| Vibration resistance | 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6 |
| 1 gn (f= 57.6…150 Hz) conforming to IEC 60255-21-1 | |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529 |
| IP30 (casing) conforming to IEC 60529 | |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Dielectric test voltage | 2 kV, 1 min AC 50 Hz |
| Non-dissipating shock wave | 4 kV |