The V211T is an internally threaded 2-way globe valve designed for a wide range of heating and cooling applications. The valve uses a crown plug for precise fluid control. Nodular iron construction provides a long life and high corrosion resistance. The crown plug provides precise fluid control with a rangeability of 50:1 and is of a self cleaning design for reliable operation. Valve size: DN50, Flow capacity, Kvs: 38 m³/h. Constructed and flanged to a PN16 pressure class. ΔPm of 400 Kpa. EPDM seals provide a working temperature range of -20 °C to + 120 °C, the soft seat seal ensures a tight close off with no leakage. 20 mm stroke ensures high controllability, Equal percentage flow characteristic ensures high controllability at low opening degrees. Meets the 214/68/EE, article 4.3 of the PED (Pressure Equipment Directive). PN16 flanges have fibre gaskets bonded to the flange face. The flange face has a design that accommodates that flexes to allow small mis alignment in the pipes. Valve Length (between flanges) is 13 mm, height is 164.5 mm, width 95 mm, Weight is 2.1 Kg. High Controllability and long life.
|
Main |
|
| Valve product range | Venta |
| Product or component type | Valve |
| Valve type | Globe |
| Valve product series | V211T |
| Valve model | V211T/50/38 |
| Medium compatibility | Glycol 25 % |
| Glycol 30 % | |
| Glycol 50 % | |
| Water | |
| Valve configuration | 2-Way |
| Valve connection type | Rp Internal |
| Valve connection size | Rp 2 |
| Body size | 50 mm (2 in) |
| Pipe size | 50 mm |
| Flow characteristic | Equal percentage |
| Flow coefficient | 43.94 cv |
| 38 kvs | |
| Pressure class | PN16 |
| Operating fluid temperature | -20…120 °C |
| Pressure fluid max delta P normal life | 399.9 kPa |
| Control valve rangeability | Greater than 50:1 |
| Stroke length | 20 mm |
| Seat leakage | Port A: Class IV-S1 (0.005 %) |
| Stem flow action | Stem up closed |
| Stem movement | Linear |
| Trim material | Brass |
| Body material | Nodular cast iron EN-JS 1030 |
| Seat material | Port A: nodular cast iron EN-JS 1030 |
| Stem material | Stainless steel AISI 303 |
| Plug material | CW602N brass |
| Stem seal material | EPDM (ethylene propylene diene monomer) |
| Seating seal material | Port A:EPDM (ethylene propylene diene monomer) |
| Packing material | EPDM (ethylene propylene diene monomer) |
| targeted region | Europe |
| Asia Pacific. | |
| Australia. |